Boxer Racer: North East Custom’s BMW R1150R Rockster

BMW R1150R Rockster from North East Custom
Does anyone remember
the BMW R1150R Rockster? It was an attempt by BMW to inject some edginess into their capable but somewhat vanilla R1150R. So they gave it squinting headlights, a wider rear wheel, a hazard tape livery… and an unfortunate name.

It was good enough to turn heads and agile enough to be a fun ride, but it also dated really quickly. So when the owner of this particular 2003-model Rockster decided it was time for an upgrade, he he had no qualms about ditching the quirky styling, and using it as the base for a custom project.

BMW R1150R Rockster from North East Custom
The 1,130 cc boxer went straight to brothers Diego and Riccardo Coppiello at North East Custom in Padua, Italy. The Coppiello bros. have a few early-2000s BMW boxer builds under their belts, so they’re well-versed in the art of transforming them.

For this project, the goal was to update the looks, but also throw a few performance upgrades into the mix.

BMW R1150R Rockster from North East Custom
“Our client used the Rockster mostly for mountain rides,” Diego tells us, “but recently he started to go to the racetrack as well. And he really enjoys it, because it’s on the track the BMW gives its best.”

“The brief was to make it technically better and give it a new aesthetic. He wanted a bike suitable to ride to the track for track days, have fun, and then easily ride back home.”

BMW R1150R Rockster from North East Custom
A couple of details stayed the same: like the R1150R’s sculpted fuel tank, and its handlebars, so that the original rider ergonomics wouldn’t be affected too much.

But the rear section is new, starting with a narrower custom seat that flows off the back of the tank, and tapers down into a hand-made tail cowl. It’s been shaped to allow the rider more movement on the bike when cornering, and is covered in an eco leather.

BMW R1150R Rockster from North East Custom
The aluminum tailpiece is nicely formed too, with a ridge on top that includes a row of embedded taillights, and a plate bracket with turn signals further down. Everything sits on a sharp new custom subframe, creating a much cleaner line than the factory setup.

North East hammered out an aluminum headlight nacelle next, and wrapped it around an LED unit from JW Speaker. Since the R1150R uses BMW’s unusual Telelever suspension (where the fork lowers move, not the uppers) a custom bracket had to be made to install the new arrangement.

BMW R1150R Rockster from North East Custom
Higher up you’ll spot a tiny digital speedo and bar-end turn signals from Motogadget, new grips and new brake and clutch master cylinders from Braking.

Rounding out the bodywork are a few carbon fiber pieces, made for the project by an external supplier. Those include the front fender, valve cover guards, and the skinny side panels that sit beneath the tank.

BMW R1150R Rockster from North East Custom
As for the go-faster and turn-better bits, Diego and Riccardo opted for practical and useful upgrades. There are now Öhlins shocks at both ends, and the tires have been swapped for Pirelli Supercorsa BSBs.

The engine internals are stock, but the guys added a Virex exhaust system, and swapped the air box for a pair of K&N filters. Then they installed a Rapid Bike control unit, so they could extract optimal performance from the boxer.

BMW R1150R Rockster from North East Custom
With a much sharper silhouette and improved riding dynamics, North East’s Rockster is miles ahead of the original. But it’s the inspired livery that pushes it over the edge: it uses BMW’s traditional racing colors, but with a twist on how they’re executed.

The fork legs and wheels have been done in matte gold as a finishing touch.

BMW R1150R Rockster from North East Custom
“We’re very satisfied with the final result,” says Diego. “It’s a reliable bike, with a very good riding position. It lets you cover the kilometers, and also gives you the chance to enjoy a track day, making the best of the engine.”

We never thought we’d be drooling over a Rockster on these pages, but then again, the best builders are capable of pulling rabbits out of hats. We’d take this beauty to a track day, any day.

North East Custom | Facebook | Instagram | Images by Filippo Molena

BMW R1150R Rockster from North East Custom

SHARE THIS ARTICLE
READ NEXT